|
|
|
Cincinnati
T10 Horizontal Machining Center
|
s/n
3121A1183-0012-R87 |

Click on Image to View Gallery |
Acramatic
900 Controller
|
s/n
51-S900M15H-0153 |
| (2)
500mm Pallets |
|
| 45
Tool magazine with #50 CAT Taper |
|
| 4000
max spindle rpm |
|
Jorgensen
Chip Conveyor
|
s/n A-83338 |
| Jet
Pulser High Pressure Coolant Pump (1000psi) |
|
| Price:
$12,500 |
|
|
|
| |
|
|
|
|
Cincinnati
Cinturn 208
|
s/n
5550U08-86-030 |

Click on Image to View Gallery |
Acramatic
850 Control
|
|
8"
3 Jaw 1-3/4" Max Spindle Capacity
|
|
| Terry
Barfeeder 1/4 to 2-1/2" Capacity |
|
| No
Part Catcher |
|
Jorgensen
Chip Conveyor
|
s/n J86589 |
| Note:
(1) ID Boring Station on Turret is Damaged |
| Price:
$5,000 or best offer |
|
|
|
Cincinnati
Horizontal Dial Mill - Model 3
|
s/n
4A3U1R-4 |

Click
on Image to View Gallery |
15”
X 63” Table with X=34” Y=19” Z=13”
|
|
| 7-1/2HP,
220 Volt / 3 Phase |
|
| Service
Manual & Repair Parts Catalog Included |
|
| Price:
$1800.00 or best offer |
|
| |
|
|
|
|
| Induma
Horizontal/Vertical Manual Mill |
s/n
3369467 |

Click
on Image to View Gallery |
| 12”
X 60” Table with X=43 ¼” Y=12 ¼”
Z=18 ¼” |
| 7HP,
220 Volt / 3 Phase |
|
| Service
Manual and Spare Parts Catalog Included |
| Vertical
Attachment and 2 Arbor Supports Included |
| Price:
$1800.00 or best offer |
Mfg.
Date 12/01/1967 |
| |
|
|
|
|
14"
Clausing Manual Lathe 6913
|
s/n
602445 |

Click on Image to View Gallery |
6"
Swing
|
|
| 5C
Collet Attachment and 8" 3 Jaw Chuck Included |
|
| 6
Tool Turret, Cross Slide and Tail Stock Included |
|
| Variable
Speed Rebuilt in '98 |
|
| 220/440
Vac - 3 Phase - 60 Cycle |
|
| Part
and Service Manuals Included |
|
| Price:
NEGOTIABLE |
Mfg.
Date 1967 |
|
|
|
Radial Arm Drill
|
|

Click on Image to View Gallery |
TABLE SIZE: 18”W X 21-5/8”L X 20”HT
|
|
| TRAVEL: 26” HORIZONTAL, 23” VERTICAL |
|
| SWIVEL ANGLE OF ARM = 360° |
|
| SPINDLE TAPER MT #4 |
|
| SPINDLE RANGE OF SPEEDS 60-2000 RPM |
|
SPINDLE FEEDS (3) .004/.008/.012 IN/REV
|
|
| SPINDLE TRAVEL 5” |
|
SPINDLE MOTOR 3 HP
|
|
| POWER VOLTAGE 3PH 220/440 |
|
COOLANT RESERVOIR, LESS PUMP
|
|
| Price:
$2,500 or best offer |
|
|
|
|
Spencer
IndustraVac System P-134
|
s/n
314645 |

Click on Image to View Gallery |
2
HP - 3500 RPM - 230 Volts - 3 Phase - 70 SCFM @ 3" Hg
|
|
| With
P-9004 Silencer |
|
| Nema
1 Starter with 50' Cable and Plug |
|
| Has
5oz Polyester Filter Bags |
|
| Price:
$1,500 |
NEVER
USED |
|
|
|
Miller
330ST Aircrafter Welder
|
s/n
44514839 |

Click on Image to View Gallery |
Air
Products 300 AMP Water Cooled VIS-ARC II Torch Included
|
|
| Foot
Pedal (RFCS-23) Included |
|
| 1/16,
3/32, and 1/8 Collets Included |
|
| Short
and Long Back Caps, and Misc Lava Nozzles Included |
|
| 200/230/460
Volt / Single Phase |
|
| Installation,
Operation and Maintenance Manuals Included |
|
| Price:
NEGOTIABLE |
Mfg.
Date 1987 |
|
|
|
|
|
1000
© 2001 ClearPages. All rights reserved.
|